Forums > Technical Discussion > The making of...
Login/Join to Participatemember
10 posts
Location: Sweden
10 posts
Location: Sweden
Posted:
Just made a staff and thought I'd share the process and prices.
NOTE: I live in sweden so the prizes is for the swedish market. All prices and mesurements in US values are NOT exact.
Things needed:
I bought 1,5m(5 feet) aluminum Pipe, 20mm(4/5 inch) in diameter and 1mm(1/25 inch)thick. Cost me about 30 SEK(3,5 USD). Then some griptape that cost me 60 SEK(7 USD). The realy expensive thing was of cause the wick, that I mailorderd from a shop in Stockholm. I bought 2m(6 feet 8 inches) that is 45mm(1 4/5 inch) thickand it cost me (with shipping) 240 SEK (30 USD).
Then i drilled holes so i could fasten the wick, att first I thought I'd use screws and nuts to fasten them but I ended up with using some 2mm(2/25 inch) iron wire(since i forgot to buy the screws when i bought the pipe). I found that with the wire you can get the wick real tight, and you know thats good.
So in a very short time, about 2 hours work with shopping, I made my self a staff for 330 SEK(40,5 USD). That is about 200 SEK less then I would have to pay if i bought it from the same shop that i bought the wick from.
So good luck out there and happy swinging.
Just made a staff and thought I'd share the process and prices.
NOTE: I live in sweden so the prizes is for the swedish market. All prices and mesurements in US values are NOT exact.
Things needed:
I bought 1,5m(5 feet) aluminum Pipe, 20mm(4/5 inch) in diameter and 1mm(1/25 inch)thick. Cost me about 30 SEK(3,5 USD). Then some griptape that cost me 60 SEK(7 USD). The realy expensive thing was of cause the wick, that I mailorderd from a shop in Stockholm. I bought 2m(6 feet 8 inches) that is 45mm(1 4/5 inch) thickand it cost me (with shipping) 240 SEK (30 USD).
Then i drilled holes so i could fasten the wick, att first I thought I'd use screws and nuts to fasten them but I ended up with using some 2mm(2/25 inch) iron wire(since i forgot to buy the screws when i bought the pipe). I found that with the wire you can get the wick real tight, and you know thats good.
So in a very short time, about 2 hours work with shopping, I made my self a staff for 330 SEK(40,5 USD). That is about 200 SEK less then I would have to pay if i bought it from the same shop that i bought the wick from.
So good luck out there and happy swinging.
...and that's it for now.
Similar Topics
Using the keywords [making] we found the following existing topics.
- Forums > Check This Out [8 replies]
- Forums > Music to spin to, Tell us your favourite music to dance to [371 replies]
- Forums > fire clubs [1 reply]
- Forums > making Fire poi [4 replies]
- Forums > Kerosine sucks! [11 replies]
Show more..
© 1998 - 2025 Home of Poi
All prices converted to United States dollars using XE.com