Twisthem488member
187 posts
Location: USA


Posted:
kk. this is a tutorial on making quick, $2.50 pair of LED poi. Some of you may have a store called deals nearby. its a shop that sells everything from a pound of fudge, to duct tape all for a dollar. I often go there to buy some glow sticks for school dances and the last time i went they has light sticks. basically it was a LED in a metal tube that had a large (3mm wide) fiber optic wire in a piece of plastic. other stores may sell them cheap too, but there i can get them for 1 dollar. get 2. I took them home, yanked the plastic/fiber optic off. this allows it to still glow, but the LED is still protected because there is a ring of plastic around it. on the end is a small hole. i took some kite string and wound it through about 3 times, tied it. and tied a loop in the other end for my hand. took just a few minutes and only cost $2 to make a pair. they work great too. all of the electronics is inside a metal tube, and the LED is protected. just figured i'd give some ideas. (P.S. i use tape to hold the button down, but on some brands you press the button and they light up, or flash untill you hit it again)
peace

Im a Thespian, But I'll Act Normal Around You Guys



Similar Topics Server is too busy. Please try again later. No similar topics were found
      Show more..

HOP Newsletter

Subscribe now for updates on sales, new arrivals, and exclusive offers!