На нашем веб-сайте используются файлы cookie для персонализации контента, содержания содержимого в корзине покупок и в рамках проверки.
Ваша личная информация будет сохранена и передана в виде зашифрованных данных.
У вас есть возможность обновлять и удалять вашу личную информацию.
You consent to our cookies if you continue to use this website.
Разрешить куки для
Necessary Cookies Необходимые файлы cookie не могут быть отключены, потому что они необходимы для правильного функционирования нашего веб-сайта. Они хранят ваш язык, валюту, корзину покупок и учетные данные для входа.
Файлы cookie для Google Analytics Мы используем google.com analytics и bing.com для мониторинга использования сайта и статистики страниц, чтобы помочь нам улучшить наш сайт. Вы можете включить или выключить это с помощью меток, указанных выше.
Маркетинговые куки Маркетинг Cookies отслеживает личные данные. Google и Bing отслеживают ваши просмотры страниц и покупки для использования в рекламе и ремаркетинге на других сайтах. Вы можете включить или выключить это с помощью меток, указанных выше.
Социальные куки Эти сторонние Cookies отслеживают личные данные. Это позволяет интегрировать Facebook, Twitter и Pinterest. например. показывает кнопку Facebook «LIKE». Тем не менее, они смогут просмотреть, что вы делаете на нашем веб-сайте. Вы можете включить или выключить это с помощью меток, указанных выше.
Posted: Hello everybody, I found this website after a google I made looking for "best fuel for fire batons". First of all I never realized that this art form you call "poi" ever existed. So I applaude you. Now down to business. I am attempting to make a large Indian spear which I want fire on the top of it (read not on the pointy end). I have been doing some experimenting with towels and soaking with tiki oil, sterno, fire pot gel and nothing burns longer than maybe 10 minites. I am looking for a set up that will burn with a fire about a foot long for about two hours. I was looking at fire batons and noticed they were made of Kevlar. After looking around in here it seems that yall use this too. But with some of the terminaligy you use Im a little lost...My base for my spear is a 1 inch hollow metal conduit.Can someone point me in the right directions...Thanx again EDITED_BY: katpeeler (1351037840)
willworkforfoodjnrSILVER Member Hunting robot foxes 1,046 posts Location: Huddersfield, West Yorkshire, England (UK)
Posted: Hi katpeeler
The only way you would be able to get two hours of burn time is with some form of fuel reservoir. We do this with a lighting pot for our shows and you should be able to adapt it for your purpose.
Take a metal can – paint tins work well. Cut a slit into the lid. Get some Kevlar wick (you can buy it from home of poi) not quite as wide as your pot and about 2 inches longer than the pot is tall. Force this through the slit so that 2 inches of wick sit out of the top. You can then fill the pot with fuel and put the lid on. The wick will soak up fuel and after a minute you should be able to light the wick, which will burn until you run out of fuel.
Use paraffin (kerosene) for fuel btw.
For 2 hours you will need quite a bit of fuel, a litre at least, so make sure that your spear is secure – you could cause a lot of damage if it collapses when lit, covering the area in fuel! Make sure the area is free of the public or anything flammable for a radius of AT LEAST 1.5 times the height of the spear, or more if possible!
Let me know if you need any more help – be safe!
Working hard to be a wandering hippie layabout. Ten years down, five to go!
Similar Topics
Using the keywords [hello guy * know] we found the following existing topics.