Forums > Technical Discussion > Staff Wicks Burn Away
Login/Join to Participatestranger
1 post
1 post
Posted:
Hi guys, im new to the forum, but a quick question maybe you guys can help me, so ive been spinning for a good year and a half now but have recently bought myself a new staff, ive soaked it in kerosene for about 3 hours on each side, but when the wicks start to light, they ember up on the bottom sides and the top, i remember the last staff i used the kevlar was a little bit softer, is there anything im doing wrong?
Hi guys, im new to the forum, but a quick question maybe you guys can help me, so ive been spinning for a good year and a half now but have recently bought myself a new staff, ive soaked it in kerosene for about 3 hours on each side, but when the wicks start to light, they ember up on the bottom sides and the top, i remember the last staff i used the kevlar was a little bit softer, is there anything im doing wrong?
SILVER Member
Hunting robot foxes
1,046 posts
Location: Huddersfield, West Yorkshire, England (UK)
Hunting robot foxes
1,046 posts
Location: Huddersfield, West Yorkshire, England (UK)
Posted:
Not sure to be honest - but you shouldn't need to soak for 3hrs! I'd just see what happens after the first burn, it may be residual packaging or thread or whatever?
Not sure to be honest - but you shouldn't need to soak for 3hrs! I'd just see what happens after the first burn, it may be residual packaging or thread or whatever?
Working hard to be a wandering hippie layabout. Ten years down, five to go!
Similar Topics
Using the keywords [staff wick * burn away] we found the following existing topics.
- Forums > Staff Wicks Burn Away [1 reply]
Show more..
© 1998 - 2025 Home of Poi
All prices converted to United States dollars using XE.com