Forums > Other Toys > wind and fire wheels, modifying
Login/Join to ParticipateSILVER Member
=^,-,^=
35 posts
Location: Ballinger, Texas, US, USA
=^,-,^=
35 posts
Location: Ballinger, Texas, US, USA
Posted:
I was thinking of doing what the subject says, buying a pair of wind and fire wheels and modifying them to carry kevlar wicks. Is there anyone who has any ideas as to how to do this? The wheels I will be using can be found here https://www.gungfu.com/htm-weapons/chines...nd-and-fire.htm
Specs
steel with chrome covering
20 inch tip to tip
I was thinking of doing what the subject says, buying a pair of wind and fire wheels and modifying them to carry kevlar wicks. Is there anyone who has any ideas as to how to do this? The wheels I will be using can be found here https://www.gungfu.com/htm-weapons/chines...nd-and-fire.htm
Specs
steel with chrome covering
20 inch tip to tip
I'm the resident Vampyre Kitteh!
NYAH!
i dream in circles...
336 posts
Location: Scotland
336 posts
Location: Scotland
Posted:
depends where you'd want your wick attached, if it were me i think I'd opt to put 4 wicks on the front part of the 'ring' in between the front 4 spikes, leaving the spikes exposed to gleam in the fire (i think making the spikes themselves burn might obscure the shape of the object too much and make it look like a big fire fan). Attaching would be fairly straightforward, the ring's flat so just wrap flat kevlar wick around tightly, fold & sew with kevlar thread (check HOP's guide to sewing up a wick end here on their DIY fan kit https://www.homeofpoi.com/shop/productDet...t-Make-Your-Own)
Also i would say the heat will be pretty intense with fire that close to your hands regardless of where you mount your wick so maybe try very small wicks to start with and be careful!!!
at post a video, i wanna see how they look
depends where you'd want your wick attached, if it were me i think I'd opt to put 4 wicks on the front part of the 'ring' in between the front 4 spikes, leaving the spikes exposed to gleam in the fire (i think making the spikes themselves burn might obscure the shape of the object too much and make it look like a big fire fan). Attaching would be fairly straightforward, the ring's flat so just wrap flat kevlar wick around tightly, fold & sew with kevlar thread (check HOP's guide to sewing up a wick end here on their DIY fan kit https://www.homeofpoi.com/shop/productDet...t-Make-Your-Own)
Also i would say the heat will be pretty intense with fire that close to your hands regardless of where you mount your wick so maybe try very small wicks to start with and be careful!!!
at post a video, i wanna see how they look
even chuck norris can't pin you down if your on fire
Similar Topics
Using the keywords [wind fire wheel * modifying] we found the following existing topics.
- Forums > wind and fire wheels, modifying [1 reply]
Show more..
© 1998 - 2025 Home of Poi
All prices converted to United States dollars using XE.com