Forums > Help! > help making my ninja v3s heavier! please help!
Login/Join to ParticipateBRONZE Member
member
4 posts
Location: USA
member
4 posts
Location: USA
Posted:
i bought the new stealth ninja v3s. i love em. only problem is im used to spinning contact poi and the weight on the ninja just isnt doin it for me. i really dnt wanna just glue a bunch of washers to the bottom of the ninjas. any ideas on how to make them heavier without throwing off the balance? i dnt want em to be wobbly either.
thanks
justin
i bought the new stealth ninja v3s. i love em. only problem is im used to spinning contact poi and the weight on the ninja just isnt doin it for me. i really dnt wanna just glue a bunch of washers to the bottom of the ninjas. any ideas on how to make them heavier without throwing off the balance? i dnt want em to be wobbly either.
thanks
justin
DIAMOND Member
member
3 posts
Location: Moscow, Russia
member
3 posts
Location: Moscow, Russia
Posted:
Justin, you can try to make additional mass using silicone sealant.
You can get nice hedgehog-style poi
like these:
Non-Https Image Link
Non-Https Image Link
To do this find silicone sealant like this one:
https://portal.kema.si/sites/kema/DOC64357-KEMASIL_NEW.jpg
Use only transparent acetate silicone.
Cut the nose to get 10-mm (3/8") diameter.
Then apply the nose to the surface, press out small portion sealant and carefully remove the nose (perpendicular to the surface)
It's a bit tricky, so first train to do it on some other surface.
After some train you can do the same with your Ninja poi.
EDITED_BY: Oxxenon (1376905842)
Justin, you can try to make additional mass using silicone sealant.
You can get nice hedgehog-style poi
like these:Non-Https Image Link
Non-Https Image Link
To do this find silicone sealant like this one:
https://portal.kema.si/sites/kema/DOC64357-KEMASIL_NEW.jpg
Use only transparent acetate silicone.
Cut the nose to get 10-mm (3/8") diameter.
Then apply the nose to the surface, press out small portion sealant and carefully remove the nose (perpendicular to the surface)
It's a bit tricky, so first train to do it on some other surface.
After some train you can do the same with your Ninja poi.
EDITED_BY: Oxxenon (1376905842)
Similar Topics
Using the keywords [making ninja v3 * heavier] we found the following existing topics.
- Forums > making ninja v3s heavier. !please help! [2 replies]
- Forums > help making my ninja v3s heavier! please help! [1 reply]
- Forums > help making my ninja v3s heavier. !please help! [1 reply]
Show more..
© 1998 - 2025 Home of Poi
All prices converted to United States dollars using XE.com