Forums > Other Toys > Whip fall repair and material
Login/Join to ParticipateBRONZE Member
Sage of many fires
22 posts
Location: Ct, USA
Sage of many fires
22 posts
Location: Ct, USA
Posted:
Howdy I have a small problem with my whip. The problem is I have no fall for it was destroyed when I was cracking it and the cracker flew off. What I need to know is what material do I use for a fall for a nylon whip and how to tie it to my whip. I have tried certain material and they have not worked. If anyone has any suggestions or advice let me know. P.S. My whip was bought from here at Home of Poi.
Howdy I have a small problem with my whip. The problem is I have no fall for it was destroyed when I was cracking it and the cracker flew off. What I need to know is what material do I use for a fall for a nylon whip and how to tie it to my whip. I have tried certain material and they have not worked. If anyone has any suggestions or advice let me know. P.S. My whip was bought from here at Home of Poi.
Mark
DIAMOND Member
Flow Artist
67 posts
Location: USA
Flow Artist
67 posts
Location: USA
Posted:
The best thing I have ever found for a fall is paracord. Since I make my whips from it, I have a lot of it. If you don't any type of nylon rope with kernmantle construction will work. There are many ways that people make and attach a fall, and you can look it up. I will tell you how I make and attach mine, which have never come off. A bit more time intensive than other methods though.
1. Measure a length of Paracord/kernmantle rope that is a little more than twice the length of the fall you want.
2. Remove the kern/core.
3. Using an awl or sharp non-cutting object, pierce a hole ~ 4 cm off center.
4. Using a bent paper clip, thread the end further away from the hole you just created, in through the hole and along the length of the cord until the ends are even. You should now have a 4 cm loop.
5. Cut and singe the ends together so that they are smooth.
6. If the end of your thong/lash has a hole, put the end of your fall through the hole and then through the loop.
6.5 If not, lash a thread through the loop and whip 5 times around then finish the lash as normal.
Done!
With the loop placed into the the fall and not tied, it will never come off.
The best thing I have ever found for a fall is paracord. Since I make my whips from it, I have a lot of it. If you don't any type of nylon rope with kernmantle construction will work. There are many ways that people make and attach a fall, and you can look it up. I will tell you how I make and attach mine, which have never come off. A bit more time intensive than other methods though.
1. Measure a length of Paracord/kernmantle rope that is a little more than twice the length of the fall you want.
2. Remove the kern/core.
3. Using an awl or sharp non-cutting object, pierce a hole ~ 4 cm off center.
4. Using a bent paper clip, thread the end further away from the hole you just created, in through the hole and along the length of the cord until the ends are even. You should now have a 4 cm loop.
5. Cut and singe the ends together so that they are smooth.
6. If the end of your thong/lash has a hole, put the end of your fall through the hole and then through the loop.
6.5 If not, lash a thread through the loop and whip 5 times around then finish the lash as normal.
Done!
With the loop placed into the the fall and not tied, it will never come off.
stranger
5 posts
Location: Cheshire
5 posts
Location: Cheshire
Posted:
the other option is to use a piece of latigo or white hide, its more expensive but in my experience lasts longer.
depends on what whip its going on really
the other option is to use a piece of latigo or white hide, its more expensive but in my experience lasts longer.
depends on what whip its going on really
Similar Topics
Using the keywords [whip fall repair material] we found the following existing topics.
- Forums > Whip fall repair and material [2 replies]
Show more..
© 1998 - 2025 Home of Poi
All prices converted to United States dollars using XE.com