Forums > Technical Discussion > LED poi fix
Login/Join to ParticipateSILVER Member
enthusiast
375 posts
Location: Flying south for the winter., USA
enthusiast
375 posts
Location: Flying south for the winter., USA
Posted:
Had a problem with my poi today, didn't see anything here on it, but I figured out how to fix it so thought I'd share.
Have the rainbow LED poi I got here on HoP. Today one of them seemed to be missing a color. Would cycle through a few colors, go dark, come back in to the cycle. What I found was inside the battery tube there is a ground on both sides. I guess after bouncing off the walls, ceiling, and occasionally my head
the tube had shifted or warped a bit and one side wasn't making good contact.
Pulled out the batteries, and the tube with the chip and LED attached to the end can be slid out. It's a little tight but it can be done. Trim down the tube a hair, stick it all back together, and problem solved. Got all the colors back.
Had a problem with my poi today, didn't see anything here on it, but I figured out how to fix it so thought I'd share.
Have the rainbow LED poi I got here on HoP. Today one of them seemed to be missing a color. Would cycle through a few colors, go dark, come back in to the cycle. What I found was inside the battery tube there is a ground on both sides. I guess after bouncing off the walls, ceiling, and occasionally my head
the tube had shifted or warped a bit and one side wasn't making good contact. Pulled out the batteries, and the tube with the chip and LED attached to the end can be slid out. It's a little tight but it can be done. Trim down the tube a hair, stick it all back together, and problem solved. Got all the colors back.
SILVER Member
Magic Monkey Juice
252 posts
Location: Saaf Ingerland Innet, England (UK)
Magic Monkey Juice
252 posts
Location: Saaf Ingerland Innet, England (UK)
Posted:
Flowtoys FTW
Flowtoys FTW
"We were making castles in the sand: Now we swim in the seas that swept them away"
SILVER Member
enthusiast
375 posts
Location: Flying south for the winter., USA
enthusiast
375 posts
Location: Flying south for the winter., USA
Posted:
Thought about getting some flowtoys, but I'm a little concerned about the durability. I still screw up on a regular basis, and don't know how well they would hold up to my abuse.
These LED poi are kinda squishy and have taken a serious beating before I had to fix them, and even now they're good as new. That and when they do finally give out I won't be out much money. Spent less on my entire setup than one flowlight.
Thought about getting some flowtoys, but I'm a little concerned about the durability. I still screw up on a regular basis, and don't know how well they would hold up to my abuse.
These LED poi are kinda squishy and have taken a serious beating before I had to fix them, and even now they're good as new. That and when they do finally give out I won't be out much money. Spent less on my entire setup than one flowlight.
Poi Goddess
16 posts
Location: Oklahoma
16 posts
Location: Oklahoma
Posted:
My friend recently got those LED poi balls and then loaned them out to a friend who is tough on poi. When the batteries were low she didn't bother to change them and screwed in the battery door tighter and tighter to attempt to make the batteries last longer. Now my friend has the poi back and they are having lots of color and battery problems. Will the fix that you did for the LED balls work for my friend?
My friend recently got those LED poi balls and then loaned them out to a friend who is tough on poi. When the batteries were low she didn't bother to change them and screwed in the battery door tighter and tighter to attempt to make the batteries last longer. Now my friend has the poi back and they are having lots of color and battery problems. Will the fix that you did for the LED balls work for my friend?
BRONZE Member
journeyman
65 posts
Location: The netherlands
journeyman
65 posts
Location: The netherlands
Posted:
only way to fix that is to fix that friends brain and get him/her to pay for a new pair
you don't screw up your mates toys come on
only way to fix that is to fix that friends brain and get him/her to pay for a new pair
you don't screw up your mates toys come on
Ouch o.O
SILVER Member
enthusiast
375 posts
Location: Flying south for the winter., USA
enthusiast
375 posts
Location: Flying south for the winter., USA
Posted:
It won't fix that. You might be able to take them apart and find out what's wrong with them, but I would guess the board is cracked, no fix for that.
It won't fix that. You might be able to take them apart and find out what's wrong with them, but I would guess the board is cracked, no fix for that.
GOLD Member
Defeats the purpose
73 posts
Location: Washington, DC USA
Defeats the purpose
73 posts
Location: Washington, DC USA
Posted:
Originally Posted By: LunakiMy friend recently got those LED poi balls and then loaned them out to a friend who is tough on poi. When the batteries were low she didn't bother to change them and screwed in the battery door tighter and tighter to attempt to make the batteries last longer. Now my friend has the poi back and they are having lots of color and battery problems. Will the fix that you did for the LED balls work for my friend?
Long ago I used to use this type of glow poi regularly (eventually I switched over to Flowtoys and have never regretted it--they're worth their weight in gold). I had this same issue with the contact of the ground to the metal strips on either side of the battery compartment. My solution was to add a small sliver of aluminum foil between the spring and the battery.
Really, once this issue with the light blinking in and out starts up it's only a matter of time before the contact fails entirely, but I usually found that adding the sliver of foil gave me an additional two to three months of use before the glow ball really reached this point.
Originally Posted By: LunakiMy friend recently got those LED poi balls and then loaned them out to a friend who is tough on poi. When the batteries were low she didn't bother to change them and screwed in the battery door tighter and tighter to attempt to make the batteries last longer. Now my friend has the poi back and they are having lots of color and battery problems. Will the fix that you did for the LED balls work for my friend?
Long ago I used to use this type of glow poi regularly (eventually I switched over to Flowtoys and have never regretted it--they're worth their weight in gold). I had this same issue with the contact of the ground to the metal strips on either side of the battery compartment. My solution was to add a small sliver of aluminum foil between the spring and the battery.
Really, once this issue with the light blinking in and out starts up it's only a matter of time before the contact fails entirely, but I usually found that adding the sliver of foil gave me an additional two to three months of use before the glow ball really reached this point.
Peace,
Drex
SILVER Member
Member
1 post
Location: Greece
Member
1 post
Location: Greece
Posted:
hello people the last two months one of my pod poi dosen't work at all, i checked the battary i tried to charge it but nothing. does anyone know what im i suppose to do. thank you!
hello people the last two months one of my pod poi dosen't work at all, i checked the battary i tried to charge it but nothing. does anyone know what im i suppose to do. thank you!
Similar Topics
Using the keywords [led poi fix] we found the following existing topics.
- Forums > Led poi doesn't work properly - can I fix it? [5 replies]
- Forums > problem with led poi [5 replies]
- Forums > LED poi fix [8 replies]
Show more..
© 1998 - 2025 Home of Poi
All prices converted to United States dollars using XE.com