We will also email you these online resources.
について FiberFlies LED PixelWhip Rev 4
The fibers are designer cut to a variety of different lengths, causing a fluid swarm of lights along the entire length.
Fibers are slick and can be intertwined and easily pulled apart with minimal snags.
The detachable fiber head has a rounded bend guard that keeps your fibers resilient and makes it easy to remove your fiber bundle for storage or to toss in your bag on the go.
It is fitted with a precision radial bearing enabling smooth unhindered 360-degree rotational motion of the fibers, making all your moves flow smoother.
PixelWhip uses a single 18650 protected circuit Li-Ion battery for power (battery and USB charger included).
CAUTION: non-protected 18650 could damage your PixelWhip.
If you buy extra batteries from another source, make sure they have a protected circuit.
When you 1st receive your PixelWhip, the battery is only partially charged.
To fully charge, the battery may need to charge for 8hrs or more.
Storage and Care for PixelWhips:
PixelWhips come with a Fiberflies drawstring bag for easy transportation and to keep the fibers cleaner.
Silicone lubricants can be used to minimize snags.
Fibers will change color over time with dirt build-up.
*note: non-silicone based lubricant can make your fibers gummy.
Prevent incidental wear and tear by using PixelWhips as a movement prop instead of a weapon.
Striking fibers against hard surfaces may cause threads to become more brittle, kinked, and snap off.
However, you can purchase Fiberflies replacement heads whenever you like.
Version 4 Improvements made
Increased number of color modes.
PixelWhips remembers what color mode you were on the next time you turn it on.
The single thumb button gives total control.
Improved button design won't get accidentally pressed, yet can easily found in the dark.
Improved stability to prevent accidental color changes.
Improved circuit board keeps the fibers at full brightness, rather than dimming during the battery’s entire run-time.
18650 battery PixelWhip run-time lasts longer than ever.
No more wasteful AAA batteries!
The fiber head bend guard is improved to offer better protection of the fibers.
A detachable fiber head allows for more comfortable transport and future accessories.
Now with 40 Colour modes, check out the PDF to see color options.
Solid colors hard cut (displays a solid color for one measure at 140BPM, then changes to the next solid color)
WARNING: The torch unit, when not connected to the Whip if turned on, is very bright, avoid direct eye contact.
- PixelWhip glow toys use a single 18650 protected circuit Li-Ion battery for power (battery and USB charger
- The charge included with USB style cord.
- When you 1st receive your PixelWhip, you will need to charge the battery.
- To reach max capacity of the battery, you may need to charge for 8hrs or more.
- 重量: 220 g
- WARNING: The torch unit, when not connected to the Whip if turned on, is very bright, avoid direct eye contact.