表演, 發光玩具 購買課程會包含以下線上資源的存取權
- This stunning performance LED glow poi will enhance any spinning routine.
- These are the brightest LED Poi that we sell.
- No protection or extra cases required.
- Designed with an optimum weight for better spinning control.
- Discover 84 awesome patterns, effects and colours + demo mode.
- Ribbed for your pleasure, 7 x Soft PVC outer cushion rings greatly reduce impact.
- Optimized for rechargeable size AA battery (Included free with each Ninja poi), friendly to the environment.
- Push button layout makes for an easy on/off switch.
- Very smooth ball-bearing motion, prevents twists and reduces your tangles in cables, chains and cords.
- Perfect for your 'Orbitals' and 'Hyperloops' where long duration spinning is required.
- Complimentary poi carry bag included
有關 Pair of Stealth Ninja V4 LED Poi with Cole Cords
Extra thick ABS walls gives better weight and added protection, special 'C' shaped PVC rings provide an impact barrier protecting the spinner and the unit from harsh knocks.
Uses the more common size AA battery (1 required per unit) and uses circuitry that boosts the voltage to keep a constant light output until the battery is flattened.
NiMh battery gives minimum 5+ hours of full brightness fun, far longer times can be obtained depending on the functions and modes used.
A total of 84 colours/patterns.
Rainbow, Slow Fade, RGB Flash, Multi-step chase, Triple phase rainbow.
in multiple colours.
Chase, cogs, stars...
in multiple colours.
Strobes, cogs, stars continued in multiple colours.
Mixed solid and strobes, waves and stars in multiple colours.
Mode 6 and 7.
Custom patterns the HOP team designed, see chart below for some examples.
Demo mode, cycles through 40 patterns, each pattern 10 seconds long.
*How to Adjust the length of your Colecords*
Near the swivel pull the excess Colecord through the small circular ring to find your perfect spinning length.
Then mark the place where you will cut the Colecord next to the small ring on the excess cord.
Lengthen the excess Colecord to clearly show the mark then cut on the marked point.
Melt the end of the Colecord with a lighter to prevent further fraying, a small circular dish of melted Colecord will suffice.
Practicing the melting process can also be done on the excess off-cut of colecord before trying on your actual cords.
Once the melted disk has cooled and hardened pull the Colecord tight to the desired length again so that the small melted dish sits tightly next to the ring.
- 84 functions + demo mode from 3 Full colour LEDs
- 7 x Soft PVC outer cushion rings
- Requires a single size AA battery
- Weight: (with Battery) 102g / head
- Length = 7 inch / 175mm
- Width = 1 3/8 inch / 35mm
- Barrel is approximate size of a No.9 Swivel.
- Axle, Barrel and Rings are custom made.
- 客戶對服務和用戶幫助團隊的平均評分： 4.9
Home of Poi Ltd