Forums > Help! > help making my ninja v3s heavier! please help!

Login/Join to Participate

Justin_Ritchie
member

Member Since: 8th Jan 2013
Total posts: 4
Posted:i bought the new stealth ninja v3s. i love em. only problem is im used to spinning contact poi and the weight on the ninja just isnt doin it for me. i really dnt wanna just glue a bunch of washers to the bottom of the ninjas. any ideas on how to make them heavier without throwing off the balance? i dnt want em to be wobbly either.
thanks
justin


Delete Topic

Oxxenon
Oxxenon

member
Location: Moscow, Russia
Member Since: 23rd Jun 2009
Total posts: 3
Posted:Justin, you can try to make additional mass using silicone sealant.
You can get nice hedgehog-style poi smile like these:

Non-Https Image Link


Non-Https Image Link


To do this find silicone sealant like this one:
http://portal.kema.si/sites/kema/DOC64357-KEMASIL_NEW.jpg
br>Use only transparent acetate silicone.
Cut the nose to get 10-mm (3/8") diameter.

Then apply the nose to the surface, press out small portion sealant and carefully remove the nose (perpendicular to the surface)

It's a bit tricky, so first train to do it on some other surface.
After some train you can do the same with your Ninja poi.

EDITED_BY: Oxxenon (1376905842)


Delete