Woodford is Goodford..! Location: Sydney at heart. Member Since: 6th Jun 2007 Total posts: 241
Ive had a bit of a look through and I cant find a thread on how to light foam on fire - more specifically what TYPE of foam to use.
I have tried shaving foam (Gilette) and Styling hair foam (Swarscof *sp) to no avail. I need to figure this out asap, what to use and if anyone knows the best brand in Australia (people have told me homebrand.. but of what?)
Then of course any tips on dispensing and lighting on your arm/body.
beaniebob casually noob tech poi spinrar Location: Sydney, NSW, Australia Member Since: 22nd Nov 2010 Total posts: 155
Posted:Well, I don't know too much about setting foam on fire, but I figure that shaving foam shouldn't be overly flammable just because it's mostly water, isn't it?
I know it's possible to set plastic foams on fire though, like expanded polystyrene, and the sort of foam you find in some cushions and cheap beds and gym mats. Not sure about how safe that really is though.
(the person actually known as Chris Bailey) Location: Austin, TX, USA Member Since: 30th Jul 2003 Total posts: 544
Posted:I have heard of a troupe somewhere in the states that bubbled propane through soapy water. This could then be put on the arm, ground, thing, etc, and be burned off. I am not saying this is safe as I have not seen it in person. The person who had told me about it brought it up when I mentioned seeing this clip of the show mythbusters.
Research this plenty if you decide to try it as there is a good possibly that it is probably unwise to do.
Eldar: the warrior who fights with fire. Location: FL Member Since: 21st Apr 2012 Total posts: 3
Posted:what happens in the prank is the propellant that pushes the foam out of the can catches fire because they light it right after/as it's coming out of the can.
i would NOT use anything from the polystyrene family of chemicals, as they seem likely to take the 'melt to the skin while burning route'. A polyethylene or polypropylene foam could work Possibly, but i would do Extensive test burning on a flesh analog first- like scrap leather or something.
for the effect done at pre-heat: take the HS science class approach and build yourself a bubbler so you can fill soap bubbles with a flammable gas like propane or butane.