- All Purchases made this month instantly go into the draw to win a USD $ 100.00 credit to your HoP account.
Forums > Help! > Fire Poi, spray
Login/Join to Participate
Posted:Ive seen the move where people look like they are "spraying" fire from there poi while they spin.
I'm assuming this is just done by not spinning off your poi first. If im wrong point me in the right direction. Or are there a few different techniques for this?
I'm assuming this is just done by not spinning off your poi first. If im wrong point me in the right direction. Or are there a few different techniques for this?
"Runs with Scissors"
Delete Topic
Posted:Good evening ubersmack. What I believe you are referring to is using wire wool instead of conventional wicks.... Like this?
Sparkley Poi
There are loads and loads and loads of threads floating about using wire wool... like this:
Ta da!
...and this:
Oooooooooooo!
...and again:
Schwing!
...and again:
POW!
What I'm trying to say is you should dig about on this website. Its been going for yonks, and there is sooo much information on here already, you're less than a few clicks away from finding it.
[plus you save me the job of doing all those linkys]
But yeah! Check out that search function... Its ace.
Non-Https Image Link
Other than that... GOOD LUCK! Make sure you read all the safety things too, rather useful.
Sparkley Poi
There are loads and loads and loads of threads floating about using wire wool... like this:
Ta da!
...and this:
Oooooooooooo!
...and again:
Schwing!
...and again:
POW!
What I'm trying to say is you should dig about on this website. Its been going for yonks, and there is sooo much information on here already, you're less than a few clicks away from finding it.
[plus you save me the job of doing all those linkys]
But yeah! Check out that search function... Its ace.
Non-Https Image Link
Other than that... GOOD LUCK! Make sure you read all the safety things too, rather useful.
Delete
Posted:Good lord woman, just b/c you took all that time to write that huge post and find all those threads i looked at every single one. Tons of information, i found just what i was looking for, thanks.
On the other hand, I hate search functions. Making new threads gives new people chances to reply and speak there minds!! Not to mention it keeps the boards interesting with new things to read!! If you only have one thread for each topic then your going to run out of stuff to talk about and the board becomes a bore!! I'm not being critical you should just not jump down peoples throats when they ask for help. You were once the new person here to.
On the other hand, I hate search functions. Making new threads gives new people chances to reply and speak there minds!! Not to mention it keeps the boards interesting with new things to read!! If you only have one thread for each topic then your going to run out of stuff to talk about and the board becomes a bore!!
I'm not being critical you should just not jump down peoples throats when they ask for help. You were once the new person here to."Runs with Scissors"
DeletePosted:
don't take it personal - we're all knocking over that same ol' post... errm... never mind
Written by: US
Not to mention it keeps the boards interesting with new things to read!!
Eggsactly that might be what the mod's and long timers would like to, therefore advising "searches" for stuff that has been discussed, debated, torn apart and put back together on a molecular level for a thousand times already...
Asena, you rock!
can I hire you as my personal HoP search engine? 
Pleeeeeeeeeease!
No desire left unfullfilled, except maybe filtering and putting it together in a handy lil' PM... 
don't take it personal - we're all knocking over that same ol' post... errm... never mindWritten by: US
Not to mention it keeps the boards interesting with new things to read!!
Eggsactly that might be what the mod's and long timers would like to, therefore advising "searches" for stuff that has been discussed, debated, torn apart and put back together on a molecular level for a thousand times already...
Asena, you rock!
can I hire you as my personal HoP search engine? Pleeeeeeeeeease!No desire left unfullfilled, except maybe filtering and putting it together in a handy lil' PM...
the best smiles are the ones you lead to 
Posted: Written by: ubersmack
Good lord woman.....
*feels crotch*
Yup! Still a man!
...and yes Tom, you can
Good lord woman.....
*feels crotch*
Yup! Still a man!
...and yes Tom, you can
Delete
Mr Majestik
SILVER Member since Mar 2004
![Mr Majestik]()
coming to a country near you
Location: home of the tiney toothy bear
Total posts: 4693
SILVER Member since Mar 2004
coming to a country near you
Location: home of the tiney toothy bear
Total posts: 4693
Posted: mmmmm, yummy yummy what a devine article, even if i do say so myself
what a devine article, even if i do say so myself "but have you considered there is more to life than your eyelids?"
jointly owned by Fire_Spinning_Angel and Blu_Valley
Posted:I'm going to have to disagree with you!
Written by: ubersmack
Making new threads gives new people chances to reply and speak there minds!! Not to mention it keeps the boards interesting with new things to read!!
But its not a new thing to read. Its an old thing. A question that has been answered many many times before.
Also there are many other ways for newbies to bond with the existing community besides making duplicate threads. Theres the introductions section, social chat and discussion and all the technical forums undearneath those where old and new members alike can talk about pretty much whatever the fancy!
Written by: unbersmack
If you only have one thread for each topic then your going to run out of stuff to talk about and the board becomes a bore!!
In my opinion, one thread for each topic seems fine.
And I fail to see why mutiple threads for one topic would mean there would be more to talk about.
Also multiple threads make information much much harder to find.
And why on earth would you write out a whole new post, and wait for people to reply, when you could easily just search and have the information at your fingertips straight away!
And believe me - the diversity and bredth of this community means there will always be something to talk about.
Written by: ubersmack
I'm not being critical you should just not jump down peoples throats when they ask for help. You were once the new person here to.
Uber, the older members of the board don't go out intentially to jump down the throats of newer additions to the community, but hopefully you can imagine the frustration some people feel after having been asked the same questions over, and over, and over again.
In short, we like to keep the board tidy, where previously asked information can be found easily.
Also lots and lots of the same thing just takes up unecessary bandwidth - which has to be paid for by Malcolm, the site creator.
I hope you understand this
A x
Written by: ubersmack
Making new threads gives new people chances to reply and speak there minds!! Not to mention it keeps the boards interesting with new things to read!!
But its not a new thing to read. Its an old thing. A question that has been answered many many times before.
Also there are many other ways for newbies to bond with the existing community besides making duplicate threads. Theres the introductions section, social chat and discussion and all the technical forums undearneath those where old and new members alike can talk about pretty much whatever the fancy!
Written by: unbersmack
If you only have one thread for each topic then your going to run out of stuff to talk about and the board becomes a bore!!
In my opinion, one thread for each topic seems fine.
And I fail to see why mutiple threads for one topic would mean there would be more to talk about.
Also multiple threads make information much much harder to find.
And why on earth would you write out a whole new post, and wait for people to reply, when you could easily just search and have the information at your fingertips straight away!
And believe me - the diversity and bredth of this community means there will always be something to talk about.
Written by: ubersmack
I'm not being critical you should just not jump down peoples throats when they ask for help.
You were once the new person here to. Uber, the older members of the board don't go out intentially to jump down the throats of newer additions to the community, but hopefully you can imagine the frustration some people feel after having been asked the same questions over, and over, and over again.
In short, we like to keep the board tidy, where previously asked information can be found easily.
Also lots and lots of the same thing just takes up unecessary bandwidth - which has to be paid for by Malcolm, the site creator.
I hope you understand this
A x
Delete
Posted: Written by:
but hopefully you can imagine the frustration some people feel after having been asked the same questions over, and over, and over again.
yes i am actually a moderator on a board and know what you are talking about. But.. if it annoys me.. i just dont answer the question!
but hopefully you can imagine the frustration some people feel after having been asked the same questions over, and over, and over again.
yes i am actually a moderator on a board and know what you are talking about. But.. if it annoys me.. i just dont answer the question!
"Runs with Scissors"
DeletePosted: here, no questions remains unanswered
*humms that ol song: "don't ask me (...) I might not give an answer that you want me to..."*
here, no questions remains unanswered *humms that ol song: "don't ask me (...) I might not give an answer that you want me to..."*
the best smiles are the ones you lead to
Spanner
BRONZE Member since Feb 2003
![Spanner]()
remembers when it was all fields round here
Location: in the works... somewhere...
Total posts: 2790
BRONZE Member since Feb 2003
remembers when it was all fields round here
Location: in the works... somewhere...
Total posts: 2790
Posted: Written by: ubersmack
I'm not being critical you should just not jump down peoples throats when they ask for help.
He didn't jump down your throat at all ( ) - he was actually very polite and helpful, wishing you luck and showing concern for your safety 
I'm not being critical you should just not jump down peoples throats when they ask for help.
He didn't jump down your throat at all (
) - he was actually very polite and helpful, wishing you luck and showing concern for your safety "I thought you are man, but
you are nice woman.
yay,
:R"
Posted: Written by: Spanner
Written by: ubersmack
I'm not being critical you should just not jump down peoples throats when they ask for help.
He didn't jump down your throat at all ( ) - he was actually very polite and helpful, wishing you luck and showing concern for your safety
Werd.
Whilst Matt does *like* to jump down people's throats in... erm... other ways. he's one of the nicest chaps you could possibly meet.
I'm also a moderator of another board, but you should know that all forums work differently. This one is no exception.
Written by: ubersmack
I'm not being critical you should just not jump down peoples throats when they ask for help.
He didn't jump down your throat at all (
) - he was actually very polite and helpful, wishing you luck and showing concern for your safety Werd.
Whilst Matt does *like* to jump down people's throats in... erm... other ways. he's one of the nicest chaps you could possibly meet.
I'm also a moderator of another board, but you should know that all forums work differently. This one is no exception.
The existance of flamethrowers says that someone, somewhere, at sometime said "I need to set that thing on fire, but it's too far away."
DeletePosted:Ok ok, lets start over.
Hi all i'm Dan, 26 y.o. firefighter/warehouse worker from Madison, WI U.S.
The first post actually answered my question very well, was just presented in a sarcastic manner of sorts. But moving right along, thank you for all the reply's, and lets be friends.
Hi all i'm Dan, 26 y.o. firefighter/warehouse worker from Madison, WI U.S.
The first post actually answered my question very well, was just presented in a sarcastic manner of sorts. But moving right along, thank you for all the reply's, and lets be friends.
"Runs with Scissors"
DeletePosted:
to HoP (*whispers: "we got an intro-section" )
to HoP (*whispers: "we got an intro-section" )the best smiles are the ones you lead to
Posted: Written by: Henaree (the wee sex pot)
Whilst Matt does *like* to jump down people's throats in... erm... other ways. he's one of the nicest chaps you could possibly meet.
Woooo ye baby!
I didn't mean to cause offence?!
It was purely a random post meant in a light hearted manner, answering your question . This board is full of nice people, so I doubt you'll ever come across a sarcastic message which is meant to offend.
And, welcome to HoP!!
Have you had any luck with ze sparkwy poi?
Whilst Matt does *like* to jump down people's throats in... erm... other ways. he's one of the nicest chaps you could possibly meet.
Woooo ye baby!
I didn't mean to cause offence?!
It was purely a random post meant in a light hearted manner, answering your question
. This board is full of nice people, so I doubt you'll ever come across a sarcastic message which is meant to offend. And, welcome to HoP!!
Have you had any luck with ze sparkwy poi?
Delete
Posted: Written by: Asena
so I doubt you'll ever come across a sarcastic message which is meant to offend.
....Have you met Cantus?
so I doubt you'll ever come across a sarcastic message which is meant to offend.
....Have you met Cantus?
The existance of flamethrowers says that someone, somewhere, at sometime said "I need to set that thing on fire, but it's too far away."
DeletePosted:thank you
Written by:
Have you had any luck with ze sparkwy poi?
nah i have to build some now, im not going to rush into it and not do it right and get a wad of flaming steel wool in my face.
Not to mention its still cold here in Wisconsin, supposed to be in the 50-60's this time of year and its freakin 20-30, not really outdoor weather unless your a polar bear.
So I have read through all of the forums I can find, and am now wondering what diameter and length of wire tube is kind of "the norm". People had suggested several things, and just want to know if anyone has had luck with one thing more than the other.
Written by:
Have you had any luck with ze sparkwy poi?
nah i have to build some now, im not going to rush into it and not do it right and get a wad of flaming steel wool in my face.
Not to mention its still cold here in Wisconsin, supposed to be in the 50-60's this time of year and its freakin 20-30, not really outdoor weather unless your a polar bear.
So I have read through all of the forums I can find, and am now wondering what diameter and length of wire tube is kind of "the norm". People had suggested several things, and just want to know if anyone has had luck with one thing more than the other.
"Runs with Scissors"
DeletePosted: Written by: Fat_Rancid_Dyke
Written by: Asena
so I doubt you'll ever come across a sarcastic message which is meant to offend.
....Have you met Cantus?
I believe so. He's the chap who tried to have me thrown off a cliff into a fire... some form of sacrificial burning. Awfully good fun. Until some guy came and started throwing parafin on me... that got silly.
Written by: Asena
so I doubt you'll ever come across a sarcastic message which is meant to offend.
....Have you met Cantus?
I believe so. He's the chap who tried to have me thrown off a cliff into a fire... some form of sacrificial burning. Awfully good fun. Until some guy came and started throwing parafin on me... that got silly.
Delete
Posted:Success!
I went out and bought neccesary items and put together a small 2-3 diameter ball to test it out, worked like a charm. Now I just have to put together some larger ones.
Once again thanks for the help.
I went out and bought neccesary items and put together a small 2-3 diameter ball to test it out, worked like a charm. Now I just have to put together some larger ones.
Once again thanks for the help.
"Runs with Scissors"
Delete
Posted: Written by: Fine_Rabid_Dog
Whilst Matt does *like* to jump down people's throats in... erm... other ways
Written by: Fine_Rabid_Dog
Written by: Asena
so I doubt you'll ever come across a sarcastic message which is meant to offend.
....Have you met Cantus?
Whether it's been done to death or not, this thread was worth it for that!
Whilst Matt does *like* to jump down people's throats in... erm... other ways
Written by: Fine_Rabid_Dog
Written by: Asena
so I doubt you'll ever come across a sarcastic message which is meant to offend.
....Have you met Cantus?
Whether it's been done to death or not, this thread was worth it for that!
XLenX
Devoted although mostly absent owner of the 1, the original... Asena
Posted:Update on my quest for teh sparkwy poiz..
I built a set of 12 in. long, 4 in. diameter tubed baskets, tried them out last night and shazzam, works great. I tested one first and of course a wad of metal lands on my head synging my hair, brilliant!!
So this weekend hopefully I will make a video (this time wearing a hat) and get it uploaded for all to laugh at thanks again Asena for the help
I built a set of 12 in. long, 4 in. diameter tubed baskets, tried them out last night and shazzam, works great. I tested one first and of course a wad of metal lands on my head synging my hair, brilliant!!
So this weekend hopefully I will make a video (this time wearing a hat) and get it uploaded for all to laugh at
thanks again Asena for the help"Runs with Scissors"
DeletePosted:And an update again
Got some pics finnally after I redid my design, check em in my gallery
http://www.homeofpoi.com/gallery/showpho...=all&page=1
http://www.homeofpoi.com/gallery/showpho...=all&page=1
Got some pics finnally after I redid my design, check em in my gallery
http://www.homeofpoi.com/gallery/showpho...=all&page=1
http://www.homeofpoi.com/gallery/showpho...=all&page=1
"Runs with Scissors"
DeleteSimilar Topics
Using the keywords [spray] we found the following similar topics.1. Forums > Canoes, paddles and spray decks [16 replies]
2. Forums > Fire Poi, spray [21 replies]
3. Forums > Fire retardant spray [15 replies]
4. Forums > Flame retardant spray etc??? [11 replies]
5. Forums > contact juggling help [19 replies]
Show more..
© 1998 - 2017 Home of Poi Ltd,
New Zealand unless otherwise stated.
All rights reserved
*All prices converted to United States dollars using XE.com.