• All Purchases made this month instantly go into the draw to win a USD $ 100.00 credit to your HoP account.
 

Most LOVED Products as voted by our customers!



Live_in_a_spin
SILVER Member since Oct 2005

Live_in_a_spin

Dude where's my Poi?
Location: neather here nor there

Total posts: 383
Posted:Hi
Im soon planning on makeing a set of fire snakes.
What i want to know is a good way of sealing the ends of the rope to stop them from freying.
I saw a site where they was using some type of glue but this would need to be Fuel, heat and flame resistent does any one know what type this would be?
All so any other tips would be great.


Live life in a spin!!!
but if you fall don't come crying to me!!!

Delete Topic

ElectricStapler


newbie
Location: Go

Total posts: 33
Posted:This should be in another forum. The other toys forum.

Life is a box full of chocolates. Its full of the gross coconut ones.

Delete

LazyAngel
GOLD Member since Jul 2004

LazyAngel

Carpal \'Tunnel
Location: Cambridge UK

Total posts: 2895
Posted:Post deleted
EDITED_BY: LazyAngel (1162276220)


Because ActiveAngel sounds like a feminine deodorant

Like sex, I'm much more interesting in real life than online.

'Be the change you want to see in the world around you' - Ghandi

Delete

LazyAngel
GOLD Member since Jul 2004

LazyAngel

Carpal \'Tunnel
Location: Cambridge UK

Total posts: 2895
Posted:actually I think it's the 'technical discussion forum' wink



I also expect this has been covered before, so maybe try searching for the information?

EDITED_BY: LazyAngel (1162276258)


Because ActiveAngel sounds like a feminine deodorant

Like sex, I'm much more interesting in real life than online.

'Be the change you want to see in the world around you' - Ghandi

Delete

drvariety
SILVER Member since Mar 2006

drvariety

member
Location: Mission viejo CA

Total posts: 75
Posted:What i've seen used for the most part is just normal elmer's white glue (the stuff that american school kids use), and since its non toxic the fuel wont dissolve it. Also if you know how to splice rope, take the filling out of the center and eye splice it around the caribeaner (or what ever connection to the handle you have). Hope i could be of help.

There is nothing to be afraid of. Virtual reality will eventually rehabilitate your mind and eventually your body. Everything will be allright, i promise. Just concentrate. Try some music.

Delete

pineapple pete
SILVER Member since Sep 2004

pineapple pete

water based
Location: melbourne

Total posts: 5125
Posted:umm, lazy angel, tisnt PVC glue, thats for pipes. its actually PVA glue, regular white craft glue.

cheers, pete hug


"you know there are no trophys for doing silly things in real life yeah pete?" said ant "you wont get a 'listened to ride of the valkyries all the way to vietnam' trophy"

*proud owner of the very cute fire_spinning_angel, birgit and neon shaolin*

Delete

Live_in_a_spin
SILVER Member since Oct 2005

Live_in_a_spin

Dude where's my Poi?
Location: neather here nor there

Total posts: 383
Posted:ooooops
Yeh sorry about that.
I realised that i put this in the wrong forum after i posted it. But once its gone down the wires into cyberspace what can you do?
Anyway thanks.


Live life in a spin!!!
but if you fall don't come crying to me!!!

Delete

onewheeldave
GOLD Member since Aug 2002

Carpal \'Tunnel
Location: sheffield

Total posts: 3252
Posted:If you want it moved, click on the 'notify moderator' button, explain that it's your post and you'd like it moved to 'technical' (or wherever you want it to go).

PVA is good for sealing wicks- one useful tip I've found when making fire ropes/snakes is that leaving one with partially frayed ends, if you're willing to put up with the aesthetic discrepency, is that it makes lighting them very easy- the frayed kevlar ignites far better than a totally sealed end.


"You can't outrun Death forever.
But you can make the Bastard work for it."

--MAJOR KORGO KORGAR,
"Last of The Lancers"
AFC 32


Educate your self in the Hazards of Fire Breathing STAY SAFE!

Delete

TheBovrilMonkey
SILVER Member since Sep 2001

TheBovrilMonkey

Liquid Cow
Location: High Wycombe, England

Total posts: 2629
Posted: Written by: drvariety


since its non toxic the fuel wont dissolve it.



That doesn't sound like good reasoning to me.

Fuel won't disolve it because it's not the right solvent, not because the glue is non toxic.


But there's no sense crying over every mistake. You just keep on trying till you run out of cake.

Delete

MrConfused
BRONZE Member since Jan 2002

MrConfused

addict
Location: I wish I knew

Total posts: 529
Posted:I've had a good (by which I mean, f*cking bright) set of snakes for the past couple of years that haven't really degraded too much without the need for sealing the ends. Simply braid them and leave a little sticking out of the end of bottom knots, works a treat.

Blackbird posted a good braid design on here a few years back, might well turn up on a search.


If you're not confused, you're not thinking about things hard enough.

Delete

LazyAngel
GOLD Member since Jul 2004

LazyAngel

Carpal \'Tunnel
Location: Cambridge UK

Total posts: 2895
Posted:pete: thanks! PVA is what I meant, I guess that was a freudian slip! wink

my ropes have big, chunky knots on the end of them, no glue! never been a problem but I don't use them every time I spin, because of the excessive heat and consumption of paraffin


Because ActiveAngel sounds like a feminine deodorant

Like sex, I'm much more interesting in real life than online.

'Be the change you want to see in the world around you' - Ghandi

Delete

Mordfabrik
SILVER Member since Sep 2006

member
Location: Edmonton

Total posts: 31
Posted:On my fire snakes, I totally saturated the last tiny bit of rope with PVA until it was rock hard, and wrapped on top of that and just above it with kevlar thread in a noose pattern.

Holds together incredibly well, and there's no need for knots at the end then. Luxotica does a similar thing I think, but they use 1/4 inch rope for the wrap instead of thread. They also look pretty nice!


Delete

Live_in_a_spin
SILVER Member since Oct 2005

Live_in_a_spin

Dude where's my Poi?
Location: neather here nor there

Total posts: 383
Posted:Thank for that.
I work in the building industry so i use PVA all the time.
I never realy gave any thought as to whever it would burn/melt or not but that seams to be the general opinion on what to use so i will give it ago.


Live life in a spin!!!
but if you fall don't come crying to me!!!

Delete

+:+:+Sparkles
SILVER Member since May 2004

stranger
Location: Santa Barbara, CA

Total posts: 4
Posted:I made a set of MASSIVE DIY firesnakes. In the video I included how I chose to weave my Kevlar rope in the design I chose. There may be something you can get out of it.



Delete


Similar Topics

Using the keywords [diy snake*] we found the following similar topics.
1. Learn > Staff > Double Staff > Snake 2 - Chuu Chuu Snake *help/resource the  same side  chuu chuu snake  and the 5 hole theory    switch...
2. Learn > Staff > Double Staff > Snake 3 - Opposite Chuu Chuu Snake *help/resource explaining the opposite chuu chuu snake  and the between the legs snake  ...
3. Learn > Staff > Double Staff > Snake 1 *help/resource snake  5674 this is a tutorial on one of...
4. Learn > Juggling > 4 Balls > four ball columns (snakes) *help/resource four ball async columns  four ball snakes  this pattern is pretty simple in...
5. Learn > Fire Fans > Mr Jeff Fans Tutorials > optical snake *help/resource

     Show more..