Forums > Technical Discussion > HOP editing post, quote problem
Login/Join to ParticipateBRONZE Member
HOP librarian
1,841 posts
Location: Prague, Czech. Republic
HOP librarian
1,841 posts
Location: Prague, Czech. Republic
Posted:
When Im editing my thread post,where were quotas before,
the code of quote with [] jump into source code. Something
like so I allways delete it and
rewrite it with [].
I dont know if it affect the result, but may some small
source code change can fix it.
:R
When Im editing my thread post,where were quotas before,
the code of quote with [] jump into source code. Something
like
rewrite it with [].
I dont know if it affect the result, but may some small
source code change can fix it.
:R
POI THEO(R)IST
NYC
9,232 posts
Location: NYC, NY, USA
9,232 posts
Location: NYC, NY, USA
Posted:
i don't even think I can see your post properly.
You strange boy.
i don't even think I can see your post properly.
You strange boy.
Well, shall we go?
Yes, let's go.
[They do not move.]
BRONZE Member
HOP librarian
1,841 posts
Location: Prague, Czech. Republic
HOP librarian
1,841 posts
Location: Prague, Czech. Republic
Posted:
And you are Nick with headphones
,
:R
And you are Nick with headphones
,:R
POI THEO(R)IST
NYC
9,232 posts
Location: NYC, NY, USA
9,232 posts
Location: NYC, NY, USA
Posted:
I... never... quite... understand... richee.
Written by: Richee
And you are Nick with headphones
:R
I... never... quite... understand... richee.
Well, shall we go?
Yes, let's go.
[They do not move.]
NYC
9,232 posts
Location: NYC, NY, USA
9,232 posts
Location: NYC, NY, USA
Posted:
There's still a problem with the quote function.
For some reason, when IN REPLY MODE you click "Quote" it doesn't work... like this:
[Quote]See? Broken!![/Quote]
I think the problem is that the board doesn't understand the caps because when I simply edit the capital Q to a lower case q it works.
It's been like this for years, I keep forgetting to say something.
Note: When you hit "Quote" as to quote someone's previous post, it works fine. It's ONLY when you hit the blue Quote button (Under List End) as a "Reply".
Hope I explained that well.
I'd guess if you changed the capital Q to lowercase in whatever language that computers speak it should be fine.
There have been a few posts like this over the years but I think I finally nailed down the problem. OWDave had an issue with it too.
There's still a problem with the quote function.
For some reason, when IN REPLY MODE you click "Quote" it doesn't work... like this:
[Quote]See? Broken!![/Quote]
I think the problem is that the board doesn't understand the caps because when I simply edit the capital Q to a lower case q it works.
Written by:
See? Fixed!
It's been like this for years, I keep forgetting to say something.
Note: When you hit "Quote" as to quote someone's previous post, it works fine. It's ONLY when you hit the blue Quote button (Under List End) as a "Reply".
Hope I explained that well.
I'd guess if you changed the capital Q to lowercase in whatever language that computers speak it should be fine.
There have been a few posts like this over the years but I think I finally nailed down the problem. OWDave had an issue with it too.
Well, shall we go?
Yes, let's go.
[They do not move.]
Stargazer
6,650 posts
6,650 posts
Posted:
Written by: ]hmm, I guess(quote:.../quote))[/quote
Written by: ]you might be right(Quote:.../quote)[/quote
[QUOTE]that there is something(QUOTE.../QUOTE)[/QUOTE]Written by: ]funny about this thingy(Quote:.../quote)[/quoteWritten by: myself
especially if you are not quoting your sources (QUOTE:myself/quote)
Am I getting myself in trouble now?
EDITED_BY: FireTom (1189926885)the best smiles are the ones you lead to
SILVER Member
15,417 posts
Location: South Wales
15,417 posts
Location: South Wales
Posted:
No, you just need to have one of these "]"
I dont press the buttons anyway, I just write out the code. Same for url tags and images too. and the smilies
No, you just need to have one of these "]"
I dont press the buttons anyway, I just write out the code. Same for url tags and images too. and the smilies
GOLD Member
Carpal \'Tunnel
3,252 posts
Location: sheffield, United Kingdom
Carpal \'Tunnel
3,252 posts
Location: sheffield, United Kingdom
Posted:
I also tend to write out the code- that's obviously not a good solution for those who don't understand the code though.
I also tend to write out the code- that's obviously not a good solution for those who don't understand the code though.
"You can't outrun Death forever.
But you can make the Bastard work for it."
--MAJOR KORGO KORGAR,
"Last of The Lancers"
AFC 32
Educate your self in the Hazards of Fire Breathing STAY SAFE!
SILVER Member
15,417 posts
Location: South Wales
15,417 posts
Location: South Wales
Posted:
What's there to understand?
Surely its just about learning the format then typing it out appropriately to relate to what you want to say? No?
The HOP computer speaks PHP. And also your solution would work with no probs
I could find it, but im not an Admin. I suggest PMing Dom.
What's there to understand?
Surely its just about learning the format then typing it out appropriately to relate to what you want to say? No?
Written by: NYC
I'd guess if you changed the capital Q to lowercase in whatever language that computers speak it should be fine
The HOP computer speaks PHP. And also your solution would work with no probs
I could find it, but im not an Admin. I suggest PMing Dom.
NYC
9,232 posts
Location: NYC, NY, USA
9,232 posts
Location: NYC, NY, USA
Posted:
A better question would be "Why is there a button for something that doesn't work?"
Or, perhaps, "Why not just fix the button and then folks have a choice?"
Now, how do I nudge the mods/admins without being annoying? Maybe I should have started a new thread.
Written by: UnderControlOrFailure
What's there to understand?
A better question would be "Why is there a button for something that doesn't work?"
Or, perhaps, "Why not just fix the button and then folks have a choice?"
Now, how do I nudge the mods/admins without being annoying? Maybe I should have started a new thread.
Well, shall we go?
Yes, let's go.
[They do not move.]
SILVER Member
15,417 posts
Location: South Wales
15,417 posts
Location: South Wales
Posted:
That's not a better question though
I genuinely am a bit confused what there is to understand. You(in general) read the code, see how to adapt it, post it, repeat over time, learn it, job done.
Though I suppose learning it with capital Q's would be a bit pointless as it wouldnt work.
Dave, can you clear up the confusion please? Theres a broom over there, I'll get the dustpan.
(btw - I like this thread.. for some reason)
That's not a better question though
I genuinely am a bit confused what there is to understand. You(in general) read the code, see how to adapt it, post it, repeat over time, learn it, job done.
Though I suppose learning it with capital Q's would be a bit pointless as it wouldnt work.
Dave, can you clear up the confusion please? Theres a broom over there, I'll get the dustpan.
(btw - I like this thread.. for some reason)
BRONZE Member
Checking who's online, watching you!
1,972 posts
Location: somewhere, England (UK)
Checking who's online, watching you!
1,972 posts
Location: somewhere, England (UK)
Posted:
i like it too...
for reasons unknown, maybe its because this whole "Q" thing is some sort of HOP magic...or maybe not.
*whispers* but i think it is.
i like it too...
for reasons unknown, maybe its because this whole "Q" thing is some sort of HOP magic...or maybe not.
*whispers* but i think it is.
you just lost the game!!!!!! !!!!!
knowledge is power, power corupts, study hard, become evil.
GOLD Member
Carpal \'Tunnel
3,252 posts
Location: sheffield, United Kingdom
Carpal \'Tunnel
3,252 posts
Location: sheffield, United Kingdom
Posted:
I think a lot of people just press the button and expect it to work- when they get a gargbled quote the code is no longer visible and they may not realise that it could be anything to do with the code.
Even if they did, they may not realise that it's to do with one letter being capitalised.
(Has anyone contacted admin about this yet?)
I think a lot of people just press the button and expect it to work- when they get a gargbled quote the code is no longer visible and they may not realise that it could be anything to do with the code.
Even if they did, they may not realise that it's to do with one letter being capitalised.
(Has anyone contacted admin about this yet?)
"You can't outrun Death forever.
But you can make the Bastard work for it."
--MAJOR KORGO KORGAR,
"Last of The Lancers"
AFC 32
Educate your self in the Hazards of Fire Breathing STAY SAFE!
SILVER Member
15,417 posts
Location: South Wales
15,417 posts
Location: South Wales
Posted:
Ahhh right, I getcha now. ta for explaining.
I havent contacted anyone - I thought NYC would be as he made the discovery/ found the answer.
Like I said, I think Dom would be the best to ask, then Malcolm, as I think Malcolm is a bit busy at the moment.
Ahhh right, I getcha now.
ta for explaining.I havent contacted anyone - I thought NYC would be as he made the discovery/ found the answer.
Like I said, I think Dom would be the best to ask, then Malcolm, as I think Malcolm is a bit busy at the moment.
NYC
9,232 posts
Location: NYC, NY, USA
9,232 posts
Location: NYC, NY, USA
Posted:
I PMed Malcolm and referenced this thread.
We explained the problem well enough right?
The upper case [ Q u o t e ] and [ / Q u o t e] at the end of the quote should be changed to lower case [ q u o t e ] and [ / q u o t e ] in the "quote" function ON THE REPLY PAGE which you get to from here by hitting "reply". The "quote" button on this page works fine.
Right now it looks like this:
[Quote]I entered this in the box after hitting 'Quote' from the reply page.[/Quote]
I PMed Malcolm and referenced this thread.
We explained the problem well enough right?
The upper case [ Q u o t e ] and [ / Q u o t e] at the end of the quote should be changed to lower case [ q u o t e ] and [ / q u o t e ] in the "quote" function ON THE REPLY PAGE which you get to from here by hitting "reply". The "quote" button on this page works fine.
Right now it looks like this:
[Quote]I entered this in the box after hitting 'Quote' from the reply page.[/Quote]
Well, shall we go?
Yes, let's go.
[They do not move.]
BRONZE Member
Sitting down facing forward . . .
2,387 posts
Location: Christchurch, New Zealand
Sitting down facing forward . . .
2,387 posts
Location: Christchurch, New Zealand
Posted:
Got it - thanks gentlemen.
UBB Javascript was putting a Capital "Q" where it is only programmed to handle a lower case "q" in the "quote" function.
Should work fine now for everybody??
PS Please don't hold off sending things like this to us because "Malcolm is busy" - quite often they're little things that are easily fixed (since he is a guru with the code!) and if it's going to take too much time we can at least note it and come back later. And sometimes they're easy enough that I can fix them without bothering Malcolm - so please - feel free! Thanks.
EDITED_BY: georgemc (1190077078)
Got it - thanks gentlemen.
UBB Javascript was putting a Capital "Q" where it is only programmed to handle a lower case "q" in the "quote" function.
Should work fine now for everybody??
PS Please don't hold off sending things like this to us because "Malcolm is busy" - quite often they're little things that are easily fixed (since he is a guru with the code!) and if it's going to take too much time we can at least note it and come back later. And sometimes they're easy enough that I can fix them without bothering Malcolm - so please - feel free! Thanks.
EDITED_BY: georgemc (1190077078)
Written by: Doc Lightning talking about Marmite in Kichi's Intro thread
I have several large jars of the stuff. I actually like it... a little. And don't tell anyone I admitted to it. 
BRONZE Member
Carpal \'Tunnel
3,749 posts
Location: Europe,Scotland,Both
Carpal \'Tunnel
3,749 posts
Location: Europe,Scotland,Both
Posted:
Written by: [NX?
]<-- i love the way my quotes alwas come up with this...
This is a post by tom, all spelling is deleberate
-><- Kallisti
NYC
9,232 posts
Location: NYC, NY, USA
9,232 posts
Location: NYC, NY, USA
Posted:
Let's see!
Yay! Thanks!
Let's see!
Written by:
Yup! Fixed!
Yay! Thanks!
Well, shall we go?
Yes, let's go.
[They do not move.]
NYC
9,232 posts
Location: NYC, NY, USA
9,232 posts
Location: NYC, NY, USA
Posted:
Yup. HoP doesn't do multiple parenthesis.
What happens if you change your name to [ q u o t e ] ?
Written by: [Nx?
]Written by: [NX?
]<-- i love the way my quotes alwas come up with this...
Yup. HoP doesn't do multiple parenthesis.
What happens if you change your name to [ q u o t e ] ?
Well, shall we go?
Yes, let's go.
[They do not move.]
BRONZE Member
Carpal \'Tunnel
3,749 posts
Location: Europe,Scotland,Both
Carpal \'Tunnel
3,749 posts
Location: Europe,Scotland,Both
Posted:
at least it dosnt try and take the whole [Nx?] and parse it... imagine if i lived in the hop server....
wait... i do
at least it dosnt try and take the whole [Nx?] and parse it... imagine if i lived in the hop server....
wait... i do
This is a post by tom, all spelling is deleberate
-><- Kallisti
BRONZE Member
Sitting down facing forward . . .
2,387 posts
Location: Christchurch, New Zealand
Sitting down facing forward . . .
2,387 posts
Location: Christchurch, New Zealand
Posted:
We'll do a virus scan immediately - that should sort you out!
Written by: Nx?
... imagine if i lived in the hop server....
We'll do a virus scan immediately - that should sort you out!
Written by: Doc Lightning talking about Marmite in Kichi's Intro thread
I have several large jars of the stuff. I actually like it... a little. And don't tell anyone I admitted to it.
BRONZE Member
Carpal \'Tunnel
3,749 posts
Location: Europe,Scotland,Both
Carpal \'Tunnel
3,749 posts
Location: Europe,Scotland,Both
Posted:
no mate, im bacterial.. :P
no mate, im bacterial.. :P
This is a post by tom, all spelling is deleberate
-><- Kallisti
Stargazer
6,650 posts
6,650 posts
Posted:
Well you were missing the point...
I quoted (by writing various codes, as explained each and every individual time).
Now:
Does not work
but:
works perfectly
EDITED_BY: FireTom (1190370338)
Written by: UnderControlOrFailure
No, you just need to have one of these "]"
Well you were missing the point...
I quoted (by writing various codes, as explained each and every individual time).
Now:
Written by: nobody
Quote: nobody ... /Quote[/Quote]
Does not work
but:
Written by: noddy
quote: noddy ... /quote
Written by: noddy
QUOTE: noddy ... /quote
works perfectly
EDITED_BY: FireTom (1190370338)
the best smiles are the ones you lead to 
SILVER Member
15,417 posts
Location: South Wales
15,417 posts
Location: South Wales
Posted:
Sorry, im remarkably confused now.
the way I see it, hop doesnt parse the code unless there is a [ quote] in there. Its doesnt matter if there isnt a
*edit - hop takes out the [/ quote] code if there is no entry code ( [ quote]), but when you edit your post, you can see it as "[ /quote]"** as well, as we have all seen, it just quotes everything in that post thereafter.
simply writing /quote wont close the quotes as the PHP/ubbcode parsing looks for "dem sqaaaaar braaaakits" to signify that there is something there for it to do.
[bold]giraffes[/bold] im not sure if that will work.. Ill just check.
Edit: Yeah, as I thought, HOP only parses the code if a) there are "dem sqaaaaar braaaakits" and b) there is a matching code reference/ set of instructions of what to do if a specific code is found, in the HOP coding.
Or am I just missing your point entirely?
Sorry, im remarkably confused now.
the way I see it, hop doesnt parse the code unless there is a [ quote] in there. Its doesnt matter if there isnt a
*edit - hop takes out the [/ quote] code if there is no entry code ( [ quote]), but when you edit your post, you can see it as "[ /quote]"** as well, as we have all seen, it just quotes everything in that post thereafter.
simply writing /quote wont close the quotes as the PHP/ubbcode parsing looks for "dem sqaaaaar braaaakits" to signify that there is something there for it to do.
[bold]giraffes[/bold] im not sure if that will work.. Ill just check.
Edit: Yeah, as I thought, HOP only parses the code if a) there are "dem sqaaaaar braaaakits" and b) there is a matching code reference/ set of instructions of what to do if a specific code is found, in the HOP coding.
Or am I just missing your point entirely?
Stargazer
6,650 posts
6,650 posts
Posted:
You are so much missing the point, but that's for popping up in picture searches that have nothing to do with your nick
If you bother to hit the "quote" button on my post, the light will come from the skies and show you eggsactly what I was doing... and not just HoPefully but most certainly
You are so much missing the point, but that's for popping up in picture searches that have nothing to do with your nick
If you bother to hit the "quote" button on my post, the light will come from the skies and show you eggsactly what I was doing... and not just HoPefully but most certainly
the best smiles are the ones you lead to
SILVER Member
15,417 posts
Location: South Wales
15,417 posts
Location: South Wales
Posted:
I dont like eggs
no wait. the other one.
frogs.
I dont like frogs.
I dont like eggs
no wait. the other one.
frogs.
I dont like frogs.
Stargazer
6,650 posts
6,650 posts
Posted:
(le sigh) But you got what I was trying to demonstrate with the second last post (the one with all that quoting)... ?
Could we have a general "HoP board problem" thread, where we can address occurring issues?
EDITED_BY: FireTom (1190531269)
(le sigh) But you got what I was trying to demonstrate with the second last post (the one with all that quoting)... ?
Could we have a general "HoP board problem" thread, where we can address occurring issues?
EDITED_BY: FireTom (1190531269)
the best smiles are the ones you lead to
Similar Topics
Using the keywords [editing post quote problem] we found the following existing topics.
- Forums > HOP editing post, quote problem [27 replies]
Show more..
© 1998 - 2024 Home of Poi
All prices converted to United States dollars using XE.com