• All Purchases made this month instantly go into the draw to win a USD $ 200.00 credit to your HoP account.

Forums > Technical Discussion > is it possible to make a fire sword

Login/Join to Participate
Page: 12
Location: melbourne, victoria, australia
Member Since: 27th Jul 2001
Total posts: 38
Posted:i just want to know if it is possible to make a fire sword. i know that you could get a pole and wraped it up in kevlar but when you hit the other sword wouldn't it destroy the kevlar. so if any one can help that would be great.thanks pete

Location: Palm Springs
Member Since: 17th Jul 2003
Total posts: 9
Posted:Recently made my first fire sword and performed a bit with it. I used an inch diameter alum. tube with the blade bit hammered flat, then left enough for a two hand handle at the end round. I flattened a small alum. tube and used self drilling screws to attach it as a hand guard and taped up the handle, wraped about 28" length of sword with 1/8 kevlar with self drilling screws, and left 6 inchs to the guard bare. Love it.
The only problem is the balance is a bit off especially when it's soaked. the blade is solid if I hit the sharp edge but bends out of shape if I hit the flat side. Any tips out there?

still can't believe it's not butter
Location: Melbourne, Australia
Member Since: 14th Nov 2001
Total posts: 6979
Posted:with a extensive wicking over a blade, it's worthwhile not to stay too long in stances that require the blade to be pointed down.
this prevents hair from growin on your hands ever again.
with hairless hands, i am half a man, with shaky virility
please help me.

Laugh Often, Smile Much, Post lolcats Always

Original Pyro
Location: Leeds, England
Member Since: 17th Aug 2003
Total posts: 26
Posted:If u wrap juggling knives in kevlar u can have juggling knives that are flamable. These can double up as fire swords. Drill two holes in the body of the knife and just bolt a strip of Kevlar on each side and there u go. Problem solved.

Take the power back


Corporate Circus Arts Entertainer
Location: Auckland
Member Since: 27th Jun 2001
Total posts: 3989
Posted:NO! Problem started!
Sorry Pyro...but you just described a way to get seriously burnt hands for most juggling knives...

FIRST have a look at the handle, does the blade go all the way through the handle, with two pieces on either sifelike a ham sandwich? Most juggling knives are made this way as other forms of construction are likely to come apart after repeated drops!

If yes, then the blade will heat up quickly and it will be hard to notice until you have burnt the inside of your palms.

Now burns are bad enough, but what happens if drop them because they are too hot? Will you be able to pick them up again if they land near something flammable? Or will it take you a minute or two, with burned hands, to grab the fire extinguisher and put them out?

This sounds like a good idea, but if the blade is a part of the handle, then its sound slike a recipe for disaster...

In my opnion of course...

HoP Posting Guidelines
* Is it the Truth?
* Is it Fair to all concerned?
* Will it build Goodwill and Better Friendships?
* Will it be Beneficial to all concerned?


Member Since: 24th Sep 2003
Total posts: 1
Posted:i am looking for videos of fire swords...
i watch star wars to learn some new tricks !
i don t know anybody around that makes this kind of stuf and incendium doesn t seem to work...

help me please

Page: 12