Forums > Help! > Buying a staff

Posted: 8th Aug 2011
not much differencce really, contact staffs are normally a bit weightier and fractionally longer (5ft) than smaller spinny sticks.
if you want to do contact I always feel better with a single piece stick, collapsables I have tried always seem to end up rattling or aren't perfectly straight making body rolls wobble.

I used 2 x 140cm for doubles contact and a 150cm for single contact all heavy fibre contacts but they may be a bit flexy and heavy for a beginner (staffs flex slightly due to fibreglass core and can therefore bounce if not smooth)

A couple of balls short of a full cascade... or maybe a few cards short of a deck... we'll see how this all fans out.

Posted: 8th Aug 2011
Thanks, clears a few things up

Was thinking about choosing the Full length aluminium with 4 inch wicks?

What would a good lenght be?
(Im about 5'9")

You Lost The Game.

Posted: 10th Aug 2011
shoulder height is normally about right, but if doing contact there is very little behind the back passes so you should be ok with 5ft, I'm 6ft and can contact 140cm staffs so they could be a good length.

The shoulder height average is a good yardstick to take as it generally means if you pass behind your back the stick is less likely to hit the ground with a wick

5ft alu stick with 4 inch wicks should be fine for contact. Make sure you have a nice wide grip by extending with raquet tape or neoprene if you find it a bit small and mark your centre of balance so you can spot it for entry and exits of body rolls like steves as getting it the right side of a body part for a smooth rotation is key

A couple of balls short of a full cascade... or maybe a few cards short of a deck... we'll see how this all fans out.

Posted: 10th Aug 2011
Thanks very much!
Muchly appreciated!

You Lost The Game.