Forums > Help! > length of 1 inch (25mm) braided kevlar® rope

Login/Join to Participate

loki.c1687SILVER Member
addict
546 posts
Location: Leeds, United Kingdom


Posted:
ello hoppers
will this rope be ok to make a staff with i would like to rope as much of the staff as possible!
mike.c

Rules and responsibities:
These are the ties that bind us.
We do what we do,because of who we are.
If we did otherwise,we would not be ourselves.
I will do what i have to do
And i will do what i must..


Bender_the_OffenderGOLD Member
still can't believe it's not butter
6,978 posts
Location: Melbourne, Australia


Posted:
how long is something 1 inch(es) wide? i'll have to get back to ya on that one..
rope wicks won't wick to a staff end was well as the normal wicking as you need to tear less of it for the whole head to unravel.

Laugh Often, Smile Much, Post lolcats Always


loki.c1687SILVER Member
addict
546 posts
Location: Leeds, United Kingdom


Posted:
just want to put to all down the staff as far to the grip as poss if you get me?
thanks bender....
mike.c

Rules and responsibities:
These are the ties that bind us.
We do what we do,because of who we are.
If we did otherwise,we would not be ourselves.
I will do what i have to do
And i will do what i must..


DuncGOLD Member
playing the days away
7,263 posts
Location: The Middle lands, United Kingdom


Posted:
ubblol It's possible, anything is possible, especially 3rd degree burns wink

Let's relight this forum ubblove


loki.c1687SILVER Member
addict
546 posts
Location: Leeds, United Kingdom


Posted:
i have a healing 2 degree burn im on my way
mike.c

Rules and responsibities:
These are the ties that bind us.
We do what we do,because of who we are.
If we did otherwise,we would not be ourselves.
I will do what i have to do
And i will do what i must..


Bender_the_OffenderGOLD Member
still can't believe it's not butter
6,978 posts
Location: Melbourne, Australia


Posted:
There are as many preferences for staff dimensions as there are staff twirlers.
My own opinion is that a firetoy should foremost allow you perform the most variety of moves.
To that goal, having some space around the handle will let you point the staff downwards without burning yourself. Even with wikkid gloves, you'll need a little space to allow for flames to lick.

I take it that you would like to heavily wick the staff across it's length, i have seen staves with gaurds near the handles to protect the hands and allow for 8" of wicking (for short staves) Please bear in mind the compromise will come in reduced capacity to:
- palm spins
- holding the staves as one, either lengthwise or in a cross formation.
- contact movements
- lower margin for errors for catching throws.

heavily wicked toys do present a significantly hotter performance, so there will be secondary considerations for your performance costume. damp your hair/wear a bandana/beanie before twirling such hot toys. be carful not to twirl tooo sloooow as the flames really to lick alot more if you do.

most of all, be careful. hope your burn heals well, mate! (I'm using Silvazone cream thrice daily..)

Laugh Often, Smile Much, Post lolcats Always


MikeIconGOLD Member
Pooh-Bah
2,109 posts
Location: Philadelphia, PA - USA


Posted:
Why not just get some 4" tape and do multiple rolls connected to each other?

Sure, you could use rope but is there a point to doing it?

Let's turn those old bridges we crossed into ashes.
We'll blaze a new trail,
and torch the rough patches.

-Me


loki.c1687SILVER Member
addict
546 posts
Location: Leeds, United Kingdom


Posted:
Thanks bender....
And icon there is a point its gona look really cool!
mike.c

Rules and responsibities:
These are the ties that bind us.
We do what we do,because of who we are.
If we did otherwise,we would not be ourselves.
I will do what i have to do
And i will do what i must..



Similar Topics Server is too busy. Please try again later. No similar topics were found
      Show more..

HOP Newsletter

Sign up to get the latest on sales, new releases and more...