Home of POI and fire twirling al final de la nocheee kon los churros fuera - uploaded by laviryinChasing the Sun? - uploaded by drakematrixBlowout - uploaded by drakematrix
      

Making Fire Chucks

      
Page 1 of 3 1 2 3 >
Topic Options
Rate This Topic
#679810 - 10/01/06 10:53 AM Making Fire Chucks
GelatinousRusk Offline
newbie

Registered: 10/01/06
I've found a cool website that shows me how to make a set of Fire Nunchucks. However, I don't know where I can get the swivel kits from (the ball bearing chain caps). Does anyone know where I could get a set from?

Chz,
_________________________
"I didn't know he existed until he didn't." - Julius Ceaser

Top
#679811 - 10/01/06 11:26 AM Re: Making Fire Chucks [Re: GelatinousRusk]
Mint Sauce Offline
The Original

Registered: 07/09/03
Loc: Lancs England
you don’t need them

go check out robs stuff on soton-firespinning

he has been doing fire nunchucks for a very long time and is the best person I know who dose them.


he has put a few build guides together a good pic of attaching the handles together is in his 3 section staff build guide


but if you thing you really need swivels either dismantle a pair of practice nunchucks or get some of these off hear


good luck and bee safe they are a bit mad.

Top
#679812 - 10/01/06 12:23 PM Re: Making Fire Chucks [Re: Mint Sauce]
GelatinousRusk Offline
newbie

Registered: 10/01/06
Cool thanks dude.
I'll be getting stuff to make em tomorrow :P
_________________________
"I didn't know he existed until he didn't." - Julius Ceaser

Top
#679813 - 10/01/06 12:35 PM Re: Making Fire Chucks [Re: GelatinousRusk]
i8beefy2 Offline
addict

Registered: 24/03/03
Loc: Ohio, USA
Actually I'd say your better off getting a pair of 15" chucks and some 2" wicking and making a cathedral style lump of wick that screws onto the bottom. I've found home-made chucks like this tend to break and fly off. At least get the propper swivel kit, which you can find by searching on google for a "nunchaku ball bearing swivel kit".

Still gotta say I prefer using real chucks and just adding wick though.

Top
#679814 - 10/01/06 12:42 PM Re: Making Fire Chucks [Re: i8beefy2]
GelatinousRusk Offline
newbie

Registered: 10/01/06
After having seriosuly looked at the site I think I'm going to make msyelf some glow chucks first. I don't fancy setting my face on fire just yet .
I've been using chucks for about a year or so now but when I sit and actually think about it fire chucks seem a tad too scary atm.
_________________________
"I didn't know he existed until he didn't." - Julius Ceaser

Top
#679815 - 10/01/06 02:19 PM Re: Making Fire Chucks [Re: GelatinousRusk]
Mint Sauce Offline
The Original

Registered: 07/09/03
Loc: Lancs England
I made some like robs but put pipe insulation on instead of wick gives the extra bulk and teaches you to keep your hands away from that bit then doing catches and stuff.

Sign into soton and download some of robs vids they will give you inspiration
_________________________
before i met those lot i thought they'd be a bunch of dreadlocked hippies that smoked, set things on fire ,and drank a lot of tea but then when i met them....oh wait (PyroWill)

Top
#679816 - 10/01/06 02:23 PM Re: Making Fire Chucks [Re: Mint Sauce]
Mint Sauce Offline
The Original

Registered: 07/09/03
Loc: Lancs England
this one is quite old now he is much better now
Ninjarob - Fun with Nunchucks

Top
#679817 - 10/01/06 03:36 PM Re: Making Fire Chucks [Re: Mint Sauce]
Moka Offline
is playing with his balls

Registered: 31/07/05
Loc: Upwey, Victoria, Australia, Ea...
Hate to sound like a kill-joy... But just remember all of you that Nunchaku are illegal in most places fire or not... (even foam covered practice ones are illegal how stupid!)
Cheers, Moka
_________________________
Contact juggling was invented by dung beetles.

Top
#679818 - 11/01/06 12:32 AM Re: Making Fire Chucks [Re: Moka]
Devilstick_Russell Offline
I like devilstick...

Registered: 10/05/04
Loc: Falmouth
yeah fire and weapons, if theres a manlier combination i'm too busy painting my nails to find it. Seriously tho i really want a set of fire chucks i have also been doing nunchucks for about a year, actually two now. I reckon they'd look proper good on fire. Alas i'm a lazy bugger.
GelatinousRusk can put the site up that you've found i'll have a goosey ganders, i've already seen Ninjarobs site
Cheers
_________________________
Does this site actually exist? Or am i talking to all my other personalities?

Top
#679819 - 12/01/06 09:52 AM Re: Making Fire Chucks [Re: Devilstick_Russell]
i8beefy2 Offline
addict

Registered: 24/03/03
Loc: Ohio, USA
A year?! I made fire chucks in the first 2 months. They aren't bad at all man. Just make sure you avoid any moves the put the end of the chuck under your forearm. Or at least do em right quick.

If you check out the Ohio Burn Unit video in the videos section theres a short clip in the middle (Beefy) of me using a single pair. The videos 54 megs, and I know thats big for you dial up people who still can't get highspeed... sorry. Over here high speed seems to be becoming the new standard.

Top
#679820 - 13/01/06 07:00 AM Re: Making Fire Chucks [Re: i8beefy2]
GelatinousRusk Offline
newbie

Registered: 10/01/06
Made myself some of the glow chucks.
They're really cool. I only have small glow sticks at the moment though, don't suppose anyone knows where I can get cheap large glow sticks?
I've been trying to get some photos, one of my mates took a couple of cool ones last night but the small sticks aren't really bright enough.
_________________________
"I didn't know he existed until he didn't." - Julius Ceaser

Top
#679821 - 13/01/06 12:59 PM Re: Making Fire Chucks [Re: GelatinousRusk]
Twisthem488 Offline
member

Registered: 27/01/04
Loc: USA
sounds cool. I made a set after breaking the ones i got from jugglingwithatwist.com

SCH 40 pvc with lots of holes cut in in. The lights actually goes into the handle and shines through the holes> cool effect. Planning on making a fire staff so maybe ill do some chucks while im at it
_________________________
Im a Thespian, But I'll Act Normal Around You Guys

Top
#679822 - 27/01/06 05:27 PM Re: Making Fire Chucks [Re: Twisthem488]
Mr Majestik Offline
CarpalTunnel hunter.

Registered: 09/03/04
Loc: home of the tiney toothy bear
i always find it annoying that making glow equipment is harder than making fire equipment.
_________________________
"but have you considered there is more to life than your eyelids?"

jointly owned by Fire_Spinning_Angel and Blu_Valley

Top
#679823 - 29/01/06 08:58 AM Re: Making Fire Chucks [Re: GelatinousRusk]
Ewokki Offline
Member

Registered: 21/01/06
Written by: GelatinousRusk


Made myself some of the glow chucks.
They're really cool. I only have small glow sticks at the moment though, don't suppose anyone knows where I can get cheap large glow sticks?
I've been trying to get some photos, one of my mates took a couple of cool ones last night but the small sticks aren't really bright enough.




TheGlowCompany Try here, they sell nice big 10" ones

Top
#679824 - 08/02/06 01:49 AM Re: Making Fire Chucks [Re: Ewokki]
Devilstick_Russell Offline
I like devilstick...

Registered: 10/05/04
Loc: Falmouth
Just almost finished a pair of Ninjarob nunchucks just the wicking left they are so nice it brings tears to my, soon to be staring at fire nunchucks as they narrowly avoid my face, eyes. (Hmm not sure if that strictly passes as a sentance, alas who can avoid the overwelming power of the unrelated tangent, not me)
_________________________
Does this site actually exist? Or am i talking to all my other personalities?

Top
#679825 - 12/02/06 08:09 PM Re: Making Fire Chucks [Re: Devilstick_Russell]
Daiz Offline
Radioactive Member

Registered: 12/02/06
Loc: Calgary, Alberta
Wanted to make some too, have the materials, the tools. Now where the hell is my time!?
_________________________
I'm gonna cut you up so bad, you gonna wish I ain't cut you up so bad.

Top
#679826 - 16/02/06 08:55 AM Re: Making Fire Chucks [Re: Daiz]
FireSmurf Offline
member

Registered: 30/09/05
Loc: Northern Ireland, Antrim, Ball...
http://salza.se/category.php?c=16 will make u any kind os costum fire weaponds u want as long as thay consider them to be withinreson safe enught. have a look.
_________________________
Thomas Bjork [Fire Artist] [clown]

Top
#679827 - 15/05/06 06:10 AM Re: Making Fire Chucks [Re: FireSmurf]
robnunchucks Offline
enthusiast

Registered: 14/07/04
Loc: manchester uk
aright i8beefy2 i acutaly find that useing swivel joints is coniderably weeker than useing fixed joints i've gone though about 5 pairs of nunchucks where the swivile joints have just come appart with ware. thats why i switched to useing fixed joints with no moveing parts there alot stronger and because theres no moveing parts they dont ware down. remember that the joints in nunchucks pull over 60G when been spun fast under those presure the nunchuck swivle kit baresings tend to ware down then come appart.

Moka though your right they are illegal its alot more complicated than that for example in some places there compleatly illegal like holand or certain states in the US (something i think is rediculus as in those same states your aloud guns but not two sticks with string between them ) finaly in some contrys like england there classed as offensive weapons which puts them in with knuckle dusters and hunting knives etc you can own them and do what you like with them on private property (with the owners permision) but you can't carry them on you in public unless they are in a sealed bag the laws abit sketchy about the what exacly a sealed bag is but essentaly your not aloud to have them someware you can get to them quickly

Devilstick_Russell hopefully by now you've finished your nunchucks any chance you could send me a picture so i could bask in there glory as well i'ed love to see how they turned out


Edited by robnunchucks (15/05/06 06:12 AM)
_________________________
My nunchucks vital statictics weight: 500g handle lenght: 16 inches chain length: 2 inches

Top
#679828 - 17/05/06 10:18 AM Re: Making Fire Chucks [Re: robnunchucks]
RaveRepresent Offline
addict

Registered: 07/05/06
holy crap... ive actually been doing nun chucks for years... never frickin thought of this... damn... now im getting some gnarly ideas...
_________________________
"I don't know what you are talking about"

"Cardinal!!! Poke her... with the SOFT CUSIONS!!!!"

"Its not working my lord!"

"Have you got all of the stuffing on one end?!"

Top
#679829 - 28/05/06 05:02 AM Re: Making Fire Chucks [Re: robnunchucks]
SpAcE_BrOtHeR Offline
Member

Registered: 24/07/05
we make fire chucks that break down into poi torches so they are not considered a felony, so you can have firechucks anywhere you go. they use the swivels, and swivels will only break if you dont clean them or lubricate them. swivels are they best way to go with chucks, it allows for much more fluidity.

heres a video of the chucks in action and a picture.

http://mailcenter2.comcast.net/wmc/v/wm/...name=chucks.JPG

http://erichabberfield.com/Uncut-dave-rhymo.wmv


Edited by SpAcE_BrOtHeR (28/05/06 05:09 AM)

Top
Page 1 of 3 1 2 3 >


Using the keywords [making chuck*] we found the following similar topics.
 1. Library > How to make your own gear > Fire Poi > Examples of making FIRE POI heads *help/resource
 2. Library > How to make your own gear > LED Poi > Tips on making LED Poi *help/resource
 3. 11 facts about chuck norris [69 replies]
 4. how much wood would a woodchuck chuck if a woodchuck could chuck wood? [7 replies]
 5. Making Fire Chucks [48 replies]

     Show more..


Moderator:  Charles, Dom, flash fire, Malcolm, Pele, Pyrolific