Forums > Technical Discussion > leaf blower Experiments - FAIL
Login/Join to Participatestranger
2 posts
2 posts
Posted:
Fellow Poi Technicians,
Experiments have been executed with a leaf blower. The idea was to blow air through a PCV pipe filled with steel wool. A few dry wall screws were drilled through the plastic pipe to hold the wool into place. The wool was lit at the top of the pipe
Unfortunately the air flow was restricted by the wool. Only a few tiny sparks came out. We imagine that had the idea worked the PVC would have melted.
FAIL!
Oh well.... without failure life is worth nothing!
Please respond with ideas on this if you have any.
Fellow Poi Technicians,
Experiments have been executed with a leaf blower. The idea was to blow air through a PCV pipe filled with steel wool. A few dry wall screws were drilled through the plastic pipe to hold the wool into place. The wool was lit at the top of the pipe
Unfortunately the air flow was restricted by the wool. Only a few tiny sparks came out. We imagine that had the idea worked the PVC would have melted.
FAIL!
Oh well.... without failure life is worth nothing!
Please respond with ideas on this if you have any.
Attention
- You have been sent this page because too many pages were requested from our server within a short time frame all from the same IP address. This "incident" has been logged, and we'll be taking a closer look at our records.
- If you feel that you should not have received this message, then please contact me. Thanks!
- Contact Administrator.
- Refresh page in a minute and continue browsing our website.